[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: questions....



> >Either disconnect the trany end of the cable, or wedge it forward, or 
> >have a helper hold it forward while you rehook it.  To rehook it you 
> >have to remove the two bolts that attach it to the side of the 
> >tunnel, pull it out, and pull the eye out where you can get the hook 
> >into it again.
> 
>         Are those the two bolts on the tunnel behind or near the gas pedal?
>         Theres a hole back there?.....ok, I'll give it a shot!

Yes, two large bolts down close to the floor, pointing right.  When 
the pedal cluster comes out you can see how the clutch pedal shaft 
feeds through the hole that is revealed and hooks onto the clutch 
cable that comes forward inside the tunnel.

Once you get your pedal cluster out of the way you will still not be 
able to see the cable.  Stick a finger inside the hole pointing up 
and slightly rearwards, the greasy cable end will be there.

BTW, you will also have to remove the kick plate and the master 
cylinder push rod to get the pedal cluster out. 

Jim
-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]