[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Auto to Manual?


Craig,

Yes I have done the tranny conversions (auto to man/man to auto), The 
EASIEST method is to find a manual pan and rear suspension and tranny 
and swap the body.  It is DEFINATELY easier to go from Manual to Auto.

The Auto Rear Fork will not accept the manual tranny nose cone.  You 
will have to find a manual rear fork.  The mounting plate for the 
shifter is different for the Auto. You will have to find a mounting 
plate for the manual shifter, cut it and weld it into the auto pan.  
Some Auto pans do not have the clutch cable tube.  You may have to open 
up the tunnel and install this.  The Auto pan will also have to be cut 
for the shifter rod to connect to the tranny nose cone.  

Like I said, buy a manual T-3 and do a body swap.  You'll have to buy 
most of the T-3 anyway...

If the tranny and pan is good I'd be interested in buying it from you, 
depending on location also.

Big Al
awpresley@earthlink.net


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]