[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Now I've get another prob. When I was peering into the fresh air intake on the cowl, I saw copious amounts of rust **inside** the intake. How do get to this area to remove the rust and repaint? Steve B. Steve, If you are talking about the part on/in the cowl, two options come to mind, both would involve removing the plastic air box underneath. 1. Sand or bead-blast inside the cowl opening and imediately paint (or at least seal) the stripped area. If the metal is not too far gone. 2. If the metal is GONE. Find a good one to cut and weld into place (Uggh.) Try the first option, you might get lucky. Big Al awpresley@earthlink.net