[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Tach install


Todd,

To install a tach, you will have to remove your clock. (It's easy.)

The positive lead from the tach goes to the pos lead from the coil (the
same connector as the one to the distributor condenser.)

Run the wire with the stock harness and graond the guage to the dash.
Hook the dash lights from the clock to the tach.

that's it.

Big Al
awpresley@earthlink.net


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]